iTechWorld DCDC40 Battery Charger
Big Power, Smart Charging – The iTechWorld DCDC40 40A DC-DC Charger
Need fast, reliable charging while you’re on the move? The iTECHDCDC40 40A DC-DC Charger is the answer. This powerhouse ensures your battery stays fully charged while you're driving, whether you're in your 4WD, caravan, or boat. With up to 40 amps of charging power, it keeps everything topped up and ready to go, no matter where your adventure takes you. Built tough for Aussie conditions, it’s the perfect addition to your setup to make sure you’re never caught without power.
The iTECHDCDC40 charger incorporates an MPPT solar controller allowing charge from solar panels or blankets. When the vehicle runs, the DCDC charger will charge via the alternator; when the vehicle stops, the iTECHDCDC40 will continue charging via your solar panels/blankets (if added).
If your car has a smart alternator, the iTECHDCDC40 has you covered with its easy-to-connect 3-pin Anderson, which allows operation with any alternator.
A unique feature of the new iTECHDCDC40 is the ability to accept a wide voltage input range from either solar or vehicle input, with the maximum input voltage now being 32v. As the iTECHDCDC40 accepts higher input voltages, it opens the door to 24v inputs as well as some larger voltage solar panels commonly found in residential installations.
The new iTECHDCDC40 is compatible with all battery types but comes into its own when paired with iTechworld lithium batteries. All iTechworld lithium batteries have low voltage protection and will enter "safe mode" to protect themselves when their voltage dips below 10v. There are various methods to bring an iTechworld lithium battery out of safe mode, but the new iTECHDCDC40 will get an iTechworld lithium battery out of safe mode automatically; if the lithium battery enters safe mode, turn off any load on the battery and the iTECHDCDC40 will take care of the rest, it's that simple.
iTechDCDC40 Battery Charger Package Contents:
- 1x iTECHDCDC40
- 6x Colour coded Anderson Connectors (3 are pre-installed to the iTECHDCDC40)
- 1x Instruction manual also found
- Warranty: 1 year
iTechDCDC40 Battery Charger User Manual:
iTechDCDC40 Battery Charger Tech Specs:
Gel: 14.1V
AGM: 14.7V
Calcium: 15.3V
LiFePO4: 14.5V
Gel: 13.5V
AGM: 13.4V
Calcium: 13.6V
Product Information
Product Information
Shipping & Returns
Shipping & Returns
iTechWorld DCDC40 Battery Charger
iTechWorld DCDC40 Battery Charger
Big Power, Smart Charging – The iTechWorld DCDC40 40A DC-DC Charger
Need fast, reliable charging while you’re on the move? The iTECHDCDC40 40A DC-DC Charger is the answer. This powerhouse ensures your battery stays fully charged while you're driving, whether you're in your 4WD, caravan, or boat. With up to 40 amps of charging power, it keeps everything topped up and ready to go, no matter where your adventure takes you. Built tough for Aussie conditions, it’s the perfect addition to your setup to make sure you’re never caught without power.
The iTECHDCDC40 charger incorporates an MPPT solar controller allowing charge from solar panels or blankets. When the vehicle runs, the DCDC charger will charge via the alternator; when the vehicle stops, the iTECHDCDC40 will continue charging via your solar panels/blankets (if added).
If your car has a smart alternator, the iTECHDCDC40 has you covered with its easy-to-connect 3-pin Anderson, which allows operation with any alternator.
A unique feature of the new iTECHDCDC40 is the ability to accept a wide voltage input range from either solar or vehicle input, with the maximum input voltage now being 32v. As the iTECHDCDC40 accepts higher input voltages, it opens the door to 24v inputs as well as some larger voltage solar panels commonly found in residential installations.
The new iTECHDCDC40 is compatible with all battery types but comes into its own when paired with iTechworld lithium batteries. All iTechworld lithium batteries have low voltage protection and will enter "safe mode" to protect themselves when their voltage dips below 10v. There are various methods to bring an iTechworld lithium battery out of safe mode, but the new iTECHDCDC40 will get an iTechworld lithium battery out of safe mode automatically; if the lithium battery enters safe mode, turn off any load on the battery and the iTECHDCDC40 will take care of the rest, it's that simple.
iTechDCDC40 Battery Charger Package Contents:
- 1x iTECHDCDC40
- 6x Colour coded Anderson Connectors (3 are pre-installed to the iTECHDCDC40)
- 1x Instruction manual also found
- Warranty: 1 year
iTechDCDC40 Battery Charger User Manual:
iTechDCDC40 Battery Charger Tech Specs:
Gel: 14.1V
AGM: 14.7V
Calcium: 15.3V
LiFePO4: 14.5V
Gel: 13.5V
AGM: 13.4V
Calcium: 13.6V
Original: $222.92
-70%$222.92
$66.88Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Big Power, Smart Charging – The iTechWorld DCDC40 40A DC-DC Charger
Need fast, reliable charging while you’re on the move? The iTECHDCDC40 40A DC-DC Charger is the answer. This powerhouse ensures your battery stays fully charged while you're driving, whether you're in your 4WD, caravan, or boat. With up to 40 amps of charging power, it keeps everything topped up and ready to go, no matter where your adventure takes you. Built tough for Aussie conditions, it’s the perfect addition to your setup to make sure you’re never caught without power.
The iTECHDCDC40 charger incorporates an MPPT solar controller allowing charge from solar panels or blankets. When the vehicle runs, the DCDC charger will charge via the alternator; when the vehicle stops, the iTECHDCDC40 will continue charging via your solar panels/blankets (if added).
If your car has a smart alternator, the iTECHDCDC40 has you covered with its easy-to-connect 3-pin Anderson, which allows operation with any alternator.
A unique feature of the new iTECHDCDC40 is the ability to accept a wide voltage input range from either solar or vehicle input, with the maximum input voltage now being 32v. As the iTECHDCDC40 accepts higher input voltages, it opens the door to 24v inputs as well as some larger voltage solar panels commonly found in residential installations.
The new iTECHDCDC40 is compatible with all battery types but comes into its own when paired with iTechworld lithium batteries. All iTechworld lithium batteries have low voltage protection and will enter "safe mode" to protect themselves when their voltage dips below 10v. There are various methods to bring an iTechworld lithium battery out of safe mode, but the new iTECHDCDC40 will get an iTechworld lithium battery out of safe mode automatically; if the lithium battery enters safe mode, turn off any load on the battery and the iTECHDCDC40 will take care of the rest, it's that simple.
iTechDCDC40 Battery Charger Package Contents:
- 1x iTECHDCDC40
- 6x Colour coded Anderson Connectors (3 are pre-installed to the iTECHDCDC40)
- 1x Instruction manual also found
- Warranty: 1 year
iTechDCDC40 Battery Charger User Manual:
iTechDCDC40 Battery Charger Tech Specs:
Gel: 14.1V
AGM: 14.7V
Calcium: 15.3V
LiFePO4: 14.5V
Gel: 13.5V
AGM: 13.4V
Calcium: 13.6V
